Switch menu

Advanced HPHT Well Design and Drilling Operations Training

From $5250 per attendee

Email Course Course PDF
Enquire About This Course In House Training

Available Courses

  • London

    22 September 2025 - 26 September, 2025

    Book Course

  • Houston

    13 October 2025 - 17 October, 2025

    Book Course

  • Dubai

    17 November 2025 - 21 November, 2025

    Book Course

Course Information

  • Course Content
  • Course Description
  • Course Objectives
  • Who Should Attend
  • CPD Unit

Course Content

Day 1
HPHT Fundamentals & Risk Landscape
• Introduction to HPHT Wells: Definitions, history, current trends
• Global Standards: API, IADC, NORSOK, OGUK, EI Guidelines
• Pressure/Temperature Thresholds & Regulatory Overview
• Subsurface & Reservoir Pressure Challenges
• Group Exercise: Hazard Identification using “Tornado Chart” Method

Day 2
HPHT Well Design, Fluids & Cementing
• HPHT Well Design Considerations: Casing design, collapse/burst, wear, H₂S/CO₂ exposure
• Fluid Engineering for HPHT: PVT behaviour, ECD management, WBM vs. OBM
• Cementing Strategy: Slurry stability, shrinkage mitigation, compressive strength
• Group Workshop: Design Challenge—Well, Fluid, and Cement Planning

Day 3
Well Control & Integrity Management
• Multi-tiered Well Control Framework: Primary, Secondary, Tertiary
• Well Control Systems: MPD, CCS, WBS and operational window management
• Well Integrity Lifecycle: Planning, diagnostics, real-time risk management
• Case Studies: Well-CAP and WCERP Plans in Tier 1–3 Emergency Scenarios
• Group Review: Gap Analysis & Lessons Learned

Day 4
Equipment, Systems & Operational Execution
• HPHT Equipment & Tools: BOPs, wellheads, liners, completion tools
• ISO/API Equipment Specifications: High-temp materials, ratings, pressure certification
• Operational Guidelines: Transition zone drilling, losses/gains, ballooning, breathing
• Fingerprinting, surge/swab, trip sheets and checklists
• Simulation: Real-time Decision-Making in HPHT Scenarios

Day 5
Completions, Well Testing & Interventions
• HPHT Completions: Metallurgy, seal systems, APB mitigation, thermal cycling
• Well Testing in HPHT: Real-time monitoring, hydrate control, emergency disconnect
• Intervention Strategy: Wireline, CTU, snubbing, QA/QC on elastomers, tools
• Final Workshop: Full Lifecycle Review & Strategic Planning

Customisation & In-House Options
This course can be fully customised for client-specific challenges, including region-specific regulations, equipment preferences, or multi-discipline audience levels.

Course Description

Advanced HPHT Well Design and Drilling Operations Training Course

This comprehensive course equips oil and gas professionals with the technical expertise and strategic insight needed to safely and efficiently plan, design, and execute High Pressure High Temperature (HPHT) well operations. Participants will gain hands-on knowledge of best practices, industry standards, and operational safeguards to reduce risk and improve performance in extreme environments. Real-world case studies and group exercises ensure the content is directly applicable to high-stakes drilling projects.

Key Benefits
• Gain in-depth knowledge of HPHT-specific challenges and risk mitigation techniques
• Learn to apply global standards (API, IADC, OGUK, NORSOK, ISO) to local operations
• Improve project outcomes by reducing operational downtime, safety incidents, and cost overruns
• Develop and implement Well Control and Emergency Response Plans tailored to HPHT conditions
• Enhance collaboration through multi-disciplinary team sessions and live case discussions

Course Objectives

By the end of this course, participants will be able to:
• Apply effective HPHT well design principles under complex subsurface conditions
• Manage risk and ensure well integrity across all stages of HPHT operations
• Select appropriate materials, fluids, cementing systems, and equipment for high-pressure environments
• Implement advanced pressure management and real-time monitoring techniques
• Prepare for HPHT completions, testing, interventions, and contingency scenarios

Who Should Attend

This course is ideal for professionals involved in HPHT drilling and completion activities, including:
• Drilling & Completion Engineers
• Wellsite Supervisors
• Operations & Project Managers
• Well Integrity Engineers
• HSE Managers & Risk Assessors
• Logistics and Technical Support Staff
• Procurement & QA/QC Engineers working on HPHT projects

Prerequisites
Participants should have:
• A foundational understanding of conventional well design and drilling operations
• 3–5 years of experience in drilling, completion, or well integrity roles
• Familiarity with well control principles and high-spec rig operations is an advantage

CPD Unit

Continuing Professional Development

35 HOURS CPD

Related Courses

Drilling Engineering for Non-Drilling Engineers Training

This short course is intended for participants in the Oil and Gas industry with or without prior basic knowledge and understanding of drilling. Participants would be introduced to the first-hand and essential concepts and principles of drilling, the process and the equipment. Basic and fundamental calculations of drilling are covered in this course as well. Case studies will be presented together with videos on the processes involved.

4 locations available

Casing and Cementing Training

The course will introduce basic casing and cement job processes including design and related calculations. The course will include practical exercises and evaluation of knowledge gained.

4 locations available

Well Planning and Programming Training

This course provides a working knowledge of well planning including the many processes involved in the scope, time and cost of the well program.

3 locations available

Drilling in a High Pressure High Temperature Environment Training

0 locations available

Offshore Drilling Technology Training

This course provides a working knowledge of offshore drilling rigs, equipment and procedures including personnel training requirements.

4 locations available

Advanced Drilling Technology Training

This course provides a working knowledge of well drilling beginning with the planning stage and progressing through the many processes involved. The course will cover theory, hands on exercises and application of case studies.

4 locations available

Pre-IWCF Well Control Training

This short course is intended for anyone requiring a better understanding of Well Control theory, equipment and procedures. It is also intended as preparation for an IWCF certification course

1 location available

Drilling Supervisor Training

The ever-growing E&P industry has identified the requirement for experienced and competent drilling teams. Training is the only road to develop and bring about a new generation of qualified drilling teams to meet the needs of emerging developments.  This course will provide the drilling Supervisor with advanced skills and knowledge needed to be competent and confident in carrying out his duties, efficiently and thus provide the basis for operation optimization.

4 locations available

Deepwater Challenges Training

This short course covers drilling in the offshore and deepwater environment challenges. Types of rigs and rig moving practices are discussed along with drilling equipment and downhole tools. A geology overview is given together with wellbore stability and well design including casing design, drilling fluids and cementing. Well control and sub-sea BOP equipment are covered together with directional drilling and completion design. The Macondo accident is presented together with analysis, implications, and new tool development, procedures and regulations for offshore industry.

4 locations available

Advanced Deepwater Drilling and Completions Training

This Course is designed for technical persons desiring to pursue their experiences in deepwater and Ultra deepwater ever growing operation and techniques. This course highlights the challenges of venturing into the deepwater generation and covers operational guidelines, risk management and well control concepts. Abandonment procedures as per regulators requirements and relief well operations overview are reviewed in details.

4 locations available

Drilling Hydraulics Training

This is a 5-day course intended for individuals with prior experience in drilling fluids and extends their knowledge to drilling hydraulics. It aims to provide basic understanding of drilling hydraulics, the methods and techniques used for pressure drop estimation, overview of drilling fluid rheology and how it affects drilling hydraulics.

4 locations available

Cementing Operations Training

The course will present an overview of oil and gas well cementing operations. The course includes overview of pore and fracture pressures, overview and discussion on cement properties, measurement techniques and evaluation of results, cement placement techniques, and cement quality evaluation. The course will cover cement standards, cement materials.

4 locations available

Stuck Pipe Causes, Prevention and Remediation Training

Stuck pipe is one of the most expensive problems (NPT) that can occur during a drilling operation.  Prevention of stuck pipe is far more economical than even the best freeing procedures. When prevention fails, a drilling professional should be able to select the most efficient remediation. Understanding and anticipating drilling problems, their causes, and planning solutions are essential.

4 locations available

Drilling Optimization Training

This course is intended to train senior engineers in the identification, application and implementation of drilling optimization techniques. The intent is that participants in this class should satisfy some of the requirements for Well Engineering, Drilling Fluid Engineering and Well Construction Engineering.

4 locations available

Drilling Fluids Technology

The course will present an overview of the application of oil well drilling and completions fluids and the circulation system. The course includes discussions of fluids technology and products, emphasizing the reasons for fluid selection and application.

4 locations available

Drilling Operations Training

The course will present an overview of oil and gas well drilling operations from start to finish. The course includes discussions of drilling technology, drilling rig components, basic drilling fluids and hydraulics coverage, cementing operations, discussions on downhole pressures, drilling problems and solutions.

4 locations available

Basic Drilling Technology Training

This course offers a comprehensive introduction to the fundamentals of drilling operations within the oil and gas industry. Designed for beginners and professionals seeking to enhance their understanding of drilling processes, this course covers essential concepts, tools, techniques, and safety protocols.

4 locations available

Drill Bit Design for Drilling Optimization Training

This course is designed to present the many properties and applications for different types of commonly used drill bits. This course will emphasize how drill bit selection using scientific based methodology will impact drilling optimization

3 locations available

Drilling Engineering 30 Days Program

This course is designed to give attendees the knowledge required to be a valuable member of a drilling engineering team. The course will cover the many operations involved in drilling, completing and performing interventions on oil and gas wells.

3 locations available

Drilling Rig Inspection, Sizing and Selection Training

The course starts with a detailed description and specification of main rig systems and equipment used for drilling and work over operations and continues with the discussion of specific procedures and check lists implemented for conducting rig equipment inspection. Finalizing with a methodology used for rig sizing and selection.

3 locations available

Managed Pressure Drilling (MPD) Training

The purpose of the curriculum is to identify and explain subject matter which can be used to provide skills for Managed Pressure Drilling operations.

3 locations available

Modern Mud Logging Training

Mud logging (or Surface logging) is the creation of a well-log when drilling a well, by examining drill cuttings and fluids brought to surface, by plotting significant drilling parameters and analyzing and plotting gas-in-mud data. The course describes how Mud logging services acquire, capture and process surface measurements and addresses how these data are used on the rig. Data handled includes drilling parameters, gas data and geological information.

3 locations available

Remedial Cementing and Advanced Cement Evaluation Well Logging Training

The course will focus on planning and performing remedial cementing operations. Advanced cement evaluation logs are presented for evaluation of existing cement job conditions and log quality is explained to prevent the unnecessary expense of performing remedial operations where not required. Advanced sealing fluids and application technics are discussed. The course will include practical exercises and examples to enhance knowledge gained.

3 locations available

Well Integrity Management Training

The course takes a multidisciplinary approach. The class will cover how well integrity engineers interact with other team members to plan, drill, complete, produce and plug wells. Emphasis is on how to assess the status of well barriers and well barrier envelopes during each phase of the life of the well. Solutions to common problems are presented.

3 locations available
View all course categories

Accredited Oil & Gas training courses straight to your inbox

Mobility Oil and Gas will occasionally send you marketing material about training courses.

  • This field is for validation purposes and should be left unchanged.