WAG-Water Alternating-Gas EOR Processes Training
From $5250 per attendee
Email CourseAvailable Courses
Houston
9 December, 2024 - 13 December, 2024
Book CourseDubai
5 May, 2025 - 9 May, 2025
Book CourseLondon
23 June, 2025 - 27 June, 2025
Book Course
Enquire About This Course
Ask us about this course and a course tutor will be in touch.
Enquire About This Course Location
Ask us about this course and a course tutor will be in touch.
Email This Course
Send this course to yourself or to a friend/colleague.
Course Information
- Course Content
- Course Description
- Course Objectives
- Who Should Attend
- CPD Unit
Course Content
I. Introduction to Enhanced Oil Recovery (EOR) Methods
Introduction to EOR methods
Comparative Performance of Different EOR Methods.
Study of Mechanisms of EOR in Chemical and Miscible and WAG methods
Screening Criteria and Technical Constraints.
II. Wag Processes and Factors Influencing Wag Process Design
• Water-Alternating-Gas (WAG) Process
• Effect of capillary number and mobility ratio on residual oil recovery
• Factor influencing WAG process design
o Fluid properties and rock fluid interaction
o Reservoir Heterogeneity and Stratification
o Availability and composition of injection gas
o WAG ratio
o Injection pattern
o Injection / production pressure and rates
o WAG cycle time
o Time to Initiate WAG process
• Advantages and Disadvantages of the WAG techniques
III. Field Case and Laboratory Case of Wag and Swag
• Original wells
• Configuration of the new injection well
• Configuration of the re-completed wells and a new well location
• Comparison of WAG and SWAG Recovery Techniques Conclusions
IV. Wag Miscible and Immiscible Displacements
• Introduction
• Background
• Objective
• Miscibility Concepts and Mathematical Background review
• The Need for Miscibility Development
• Effect of Brine Composition
• Importance of CO2 as Injectant Gas
• Problems Associated with the WAG Process
• Literature Review
• Summary and Conclusions
V. Chemical Eor Methods Utilized In Wag Projects
• Polymers
• Surfactants
• Alkaline agents
• Combinations of such chemicals:
• ASP (Alkali-Surfactant-Polymer) flooding MP (Micellar-Polymer) flooding
• Chemical Flood History in USA and China
• Objectives of Chemical Flooding
• Chemical EOR Screening Criteria
• Processes Evaluations
• Chemical success evaluation with WAG using CO2 Immiscible Processes
VI. Discussion and Conclusions
Course Description
WAG-Water Alternating-Gas EOR Processes Training Course
Water alternating gas (WAG) injection are improved oil recovery methods that involve three-phase fluid flow. It was originally proposed as a method to improve the sweep efficiency of gas by using water to control the mobility ratio and to stabilize the front (Caudle and Dyes, 1958; Christensen et al., 1998). WAG injection can lead to improved oil recovery by combining better mobility control and contacting upswept zones, and by leading to improved microscopic displacement. WAG flooding has been successfully applied to more than 60 oilfields worldwide. This course will present WAG Miscible, WAG Immiscible, WAG alternating different types of Hydrocarbon Gases and Non-HC such as N2 and CO2 Gases. Also, the course will present and study the Factors Influencing Wag Process Design such as Fluid properties and rock-fluid, Availability and composition of injection gas, Heterogeneous Permeability, Injection Pattern, Capillary pressure, Relative permeability and Wettability. A WAG Process is presented and discussed in the course as well as Field cases and Laboratory research cases and results.
Course Objectives
• Comparative of EOR methods and use of Waterflooding
• Study of the EOR Mechanism in Chemical and Miscible and WAG Methods
• EOR Screening Criteria and technical constrains for Chemical and WAG methods.
• Study of an actual case WAG Miscible and WAG immiscible processes
• Comparison between WAG Alternating and Continue Injection Gas
• Technically Review and Study of the Factors Influencing WAG Process Design (Fluid properties and rock-fluid, Availability and composition of injection gas, Heterogeneous Permeability, Injection Pattern, Capillary pressure, Relative permeability, and Wettability)
o Perform an Analysis of the Water-Alternating-Gas (WAG) Process
o Technically review and practice of the Effect of capillary number and mobility ratio on residual oil recover
o A comparative study of FIELD CASE AND LABORATORY CASE OF WAG and SWAG.
o Miscibility Concepts and Mathematical Background review
o Discussion of “The Need for Miscibility Development ”
o Effect of Brine Composition
o Importance of CO2 as Injectant Gas
o Problems Associated with the WAG Process
o The impact of the following parameters on WAG processes:
o WAG ratio
o Injection pattern
o Injection / production pressure and rates
o WAG cycle time
o Time to Initiate WAG process
• Presentation and discussion of technical information on Chemical Flooding:
o Objectives of Chemical Flooding
o Chemical EOR Screening Criteria
o Processes Evaluations
o Chemical success evaluation with WAG using CO2 Immiscible Processes
Who Should Attend
Petroleum engineers, Reservoir engineers, Production engineers, Facilities engineers , Drilling (well) engineers , Development and exploitation engineers , Geoscientists, New venture managers , Asset development managers , Employees new to the industry or with limited industry experience , Government officials , Others involved or interested in EOR technologies and strategies for improving
CPD Unit
Continuing Professional Development
35 HOURS CPD